AIM MXS Dash Dispaly

£1,700.00 Ex VAT

MXS

The new TFT colour dash loggers for motorsports.

Out of stock

SKU: 712 Category:

Description

Aim MXS Strada Car Dash Display with Icons

 

The Aim MXS Strada Car Racing Dash Display with Icons Version is a color, high-contrast, 5″ TFT dash display developed for race street and race car/bike installations which are fully configurable. It comes with two loom options, CAN or OBDII .You can configure alarm LEDs choosing color, blinking frequency and defining the logic for turning them on or off.

The Aim MXS Strada Car Racing Dash/Display is for use on tracks and streets. It acquires data from the ECU of your vehicle making it relatively easy to fit.

The Aim MXS Strada Car Dash Display is the evolution of MXL Strada, one of the most widely-spread dashes on tracks and streets all over the world. The MXS Strada has a 5″ color display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined math channels and optionally, the GPS Module. Its data sampling capability can also be incremented adding up to eight expansion modules.

MXS Strada ECU Connection

Aim systems acquire data from the ECU of your vehicle. The list of available ECU drivers is constantly updated and upgraded on our support site. The support site includes over 1,000 different ECU’s both Stock and Racing. They are sorted by manufacturer/vehicle model and for each ECU you find the proprietary communication protocols, including the standard OBDII ones. From a hardware point of view, Aim systems manage the following data lines:

  • CAN
  • RS232
  • K-Line

Aim systems acquire data from the ECU of your vehicle. The list of available ECU drivers is constantly updated and upgraded and is published here: it includes over 1,000 different ECU’s, either Stock and Racing.

MXS Strada Analog Digital Inputs

Aim systems also feature digital inputs:

  • Speed signals – From the ECU, from the GPS and from the wheel sensors.
  • RPM – From the ECU or from a digital input connected to a square wave signal (8 to 50 V) or to a low voltage (from 150 to 400 V) of the coil.
  • Lap signal – Lap and split times are sampled by the GPS or via optical receiver/transmitter.

Aim systems acquire data from the ECU of your vehicle. The list of available ECU drivers is constantly updated and upgraded and is published here: it includes over 1,000 different ECU’s, either Stock and Racing.

 

MXS Strada Second CAN

An innovative Aim MXS Strada Car Dash Display feature is its CAN2 line, managing data coming from your additional modules (i.e. ABS, traction control, infrared temperature sensors and more.

This feature meets the requirements of a growing number of race drivers as the use of additional modules is becoming quite common in a number of race series.

MXS Dash Display Second CAN

MXS Strada Math Channels

Aim systems gives you Math Channels values straight away and the dash logger can be configured to display those values (i.e. brake bias, calculated gear) all in real time.

With AiM systems you immediately get Math Channels values: the dash logger can be configured to display those values (i.e. brake bias, calculated gear) in real time.

High Contrast TFT Display

The Aim MXS Strada shows with RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more. You can choose the custom pages you wish, including up to four additional fields

A wide library of page styles, defining which data to be shown, their end of scale and measured units. Swapping between pages is quite easy with the Aim MXS Strada using the pushbuttons provided.

With AiM systems you immediately get Math Channels values: the dash logger can be configured to display those values (i.e. brake bias, calculated gear) in real time.

Watch Your Data in Pre-Configured Pages

The MXS Strada has a high contrast TFT display and its visual quality is always optimal, as its ambient light sensor keeps the backlight at the best brightness levels. The dash is available in the “Street Icons” version needed by street users (fuel, oil, water temp etc.)

MXS Strada shows, together with RPM scale, all the data you need, like speed, water temperature and oil pressure, laptimes and much more

Flexible Shift Lights and Alarms

The ten multicolored RGB shift lights on the MXS Strada can be customized to your liking to define the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs. You can configure them in order to turn them on/off depending on analog or digital inputs, ECU values, expansion values, math channels or, optionally, GPS information. You choose conditions and colors and you can select a solid alarm or flashing one and the flashing frequency. It is also possible to configure an accompanying text message along with the alarm priorities.

The ten multicolored RGB shift lights can be customized to your liking, defining the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them in order to turn them on/off depending on analog or digital inputs, ECU values, expansion values, math channels

CAN Output

With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.

Digital Output

MXS Strada features a 1 amp digital output configurable in order to be activated/deactivated depending on the value of the analog/digital inputs or on impulses coming from the ECU. This permits to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps etc. when a certain event happens.

More info

 

Switch Input Module

The Optional Accessory you can purchase is the Switch Input Module which is a small compact Sim input device, providing a simple way to input voltage signals to the dash.The module allows for connection of lights, left and right indicators, dipped beam, main beam, hazard warning, in fact up to 14 independent voltage inputs, that are then sent to the display or logger through the CAN II stream, allowing you to turn on the symbols or lights on the display.

More info

 

Race Studio 3

 

MXS Strada is to be configured via Race Studio3: you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital output, Alarms, Shift Lights and all the expansions you need.

 

Additional information

Weight 2000 kg

Reviews

There are no reviews yet.

Be the first to review “AIM MXS Dash Dispaly”